360 Degree Solar Road Marker Light LED B2 LED B2--RUICHEN Solar Road Marker Suppiler

Details

Solar Road Marker Light Features:

•High shock resistance, energy-saving, environment friendly.

•Automatically starts to work when night falls or with the onset of inclement weather.

•These Solar Road Marker lights are naturally charged by the sun.

•The LED lights of solar road marker light come on automatically as soon as it starts getting dark every night.

•Cost effective, solar road markers are easy to install and require absolutely no wires or maintenance.

•Dramatically enhance the look of your garden/yard/driveway.

•Specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.

•Solar road marker light accept OEM/ODM

Solar Road Marker Light Parameters:

Material:	Anti-UV PC
Power supply:	The solar panel(monocrystalline 2.5V/0.2W)
Battery:	NI-MH 1.2V/800MAH or Lithium battery
Working model:	Blinking or Constant Charging in the daytime and working automatically at night
LED:	Ultra-bright LED, diameter 5mm(6pcs)
LED colors:	Yellow, White, Red, Green, Blue
Life span:	3 years
Resistance:	>20T(static)
Size:	φ11256mm (φ4.412.20″)
Visual distance:	>800M
Waterproof:	IP68
Carton Size:	1pcs/box;30pcs/ctn; Weight:13.5kgs; Carton size:6034.521.5cm (1pcs/box;30pcs/ctn; Weight:29.76bs; Carton size:23.62″13.58″8.46″)

Application of Solar Road Marker Light B2:

♥Schools and hospitals

♥Highways

♥High traffic areas

♥Walking paths

♥Transit stations

♥Parks and campuses

♥Urban Road

Installation Method Of Embedded Solar Road Marker Light:

Carefully mark the distance between the placement of solar road marker lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill Φ108mm and depth will be 50mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the plastic solar road marker lights shaft.
Set the lighting surface of the solar road marker lights to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft.
After curing the solar road marker lights for 6-8 hours, remove the installation of the isolation facility.